Exhibitors

Used for pasteurization, sterilization. Material AISI 304 Material (Standard), AISI 316 Material (Optional). Heating and Cooling Heat Exchanger or Heating open steam, cooling heat exchanger type. Horizontal opening with pneumatic locking system can be made single or double doors. Products can be loaded and unloaded easily with chain basket carrying system. PLC system is automated. Easy to use with touch LCD screen. TUV NORD - CE Certified. There is a safety valve on the autoclave to prevent pressure increase while the lid is open and opening the lid before the pressure of the container decreases to atmospheric pressure. In addition, proportional safety valves against excessive pressures, audible and light warning system is available, the system has automation to protect itself. All accessories such as proportional and on - off steam valves, water valves, compressed air control valves, pressure procedures, manometers, thermometers be provided on the autoclave. Usage Areas In cans, jars or special plastic boxes. All kinds of vegetables - fruits, convenience food, meat and meat products, olive, fish, pickle, mushroom, dried tomatoes, special sauces, juice, chemical and pharmaceutical industry etc. used in manufacturing.

The water in the pools in the lower part of the machine is heated by plate heat exchangers and by means of the pumps, the upper part is sprayed with sprinklers (nozzles) on the cans or jars moving on the modular belt. The controls of the KURTSAN Pasteurization Tunnel are controlled by a touch screen on the automation PLC panel. They are economical machines with minimum operating costs thanks to minimum operator requirement and proportioning controls. Temperature, pasteurization time can read on automation panel. The temperature and time are checked by ° C degree, and minute. Steps; For each receipt can be prepared for each product. The water level is controlled by level probes, adjusted on the screen and it can be kept constant by using PLC control screen. The working level, unloading level run as automatically. There are air knives installed on both sides of the belt in order to remove water top caps of products

Heating is done by means of a thermoblock system with a steam heat exchanger, so that only the energy of the hot air supplied is transferred without contacting the product. Production can be made in accordance with the Food Codex in the oven. The clean hot air obtained is circulated in the room with the fan, so that the humidity of the product is removed and discharged through the humidity and speed controlled suction fan connected to the hood system. Hot air and humidity are controlled in the oven. Thanks to the digital thermostat, the steam valve can be controlled and the temperature can be automatically adjusted to the desired temperatures. Thanks to the humidity sensor, the humidity in the oven is measured and discharged through the moisture exhaust fan in accordance with the desired percentages. High efficiency insulation is provided to the oven and heat leaks are minimized. The inner surface and outer part of the oven chamber is made of stainless steel material.

KURTSAN Pressurized Fumigation destroy all kinds of insects in the products with CO2 gas without any chemicals required to be neutralized. Thanks to the high pressure CO2 gas, it also detonates eggs and larvae without any residue on the products. Since our system carries out the fumigation process in all natural ways, no chemicals are needed. Technical Specifications - Operation Pressure: max. 30 bar - Operation Temperature: 0/80°C - There will be safety, nozzle holes fora ir inlet and outlets. - Complete chassis will be painted against to corrosion - Elliptical shape camber, gear and flange mechanism - Hinge type door system - Special design door lock system under pressure - leakage preventive silicon gasket system that prevents leaking of gas Usage Areas Legumes, Cereals, Spice, Seed, Nuts, Dried fruits,

It is used for fast loading of canisters, bottles or jars to be sterilized or pasteurized in the autoclave from the belt to the autoclave baskets. It is used for products with various diameters and lengths due to strong magnetic field effect. Loading Autoclave Basket Machine has consisted of 4 parts; which they are inlet belt, the group of magnetic plate, the hydraulic unit and the basket loading section. When the magnetic plate stows products on pallets, meanwhile the products are arranged in the order of the products in pallet size. Hydraulic group and magnetic plate move at the same time, through all waiting time is removed. When the products reach the desired order; the basket is take it from the loading section by the rail system and the basket is put on the cart. For various lengths, the values are recorded on PLC automation screen and the when customer need to change type of container just can select from the PLC memorizes. Easy to use with touch LCD display.